Bridge Kits                            

• Bridge kits have steel I beams and are pre-drilled for deck planks, post ,and cross members.

• The lumber is ACQ treated, arsenic-free pressure treated wood, galvanized hardware is supplied, and all steel parts have a red oxide primer.

• The bridge and railings are bolt together construction and are removable if the need arises to move the bridge. 

• No permanent foundation is required in most installations.

• Our bridge kits can be fabricated to replace an existing bridge using any existing footings, such as a railroad abutment.

• Buy our bridge kits and install using your own crew or have us quote on complete installation using our experienced crew.

• Bridge kits can be constructed for a flat or arched design bridge.

• Railings can be horizontal or vertical.  42" or 54" are standard heights.  Kick plates are also available.

• The bridge has an attractive appearance when finished.

• We offer a free site visit.  We will come out to your site to discuss your options with you.

Portable Footings and Riser Support             

When dealing with a swampy area that does not have high enough or stable enough banks, our portable footings and riser support is your answer.  The footing is made of 3/16" steel and hot dipped galvanized.  The riser support holds the bridge off the ground when you do not have sufficient bank height for the bridge to sit above the waterline.  This portable footing and riser support is exclusively our invention and is patented.  With its flow-thru design, it minimizes that obstruction of the water flow and will compensate for spring's wet conditions.  A bridge approach is usually needed when a portable footing and riser support is used.  U.S. Patent No. 6,421,863

custom@inwave.com